Geutebrueck Device Event Configuration

Geutebrueck Device Event Configuration

1.Geutebrück Event Rule Configuration

  • Create event rules at the device level

  • Open the G‑Set Application.

  • In the left navigation panel, click Events / Behaviour Rules.

  • Add to create a new event rule.

  • Configure the event parameters (conditions and actions) and Save the event configuration.

  • Once the event is triggered, it will automatically appear in the G-view Application Event log and Genesis Platform.

Note: For detailed guidance on event setup, refer to the event setup video provided below


            


2.Viewing Event Logs in G‑View Application

  1. Open the G‑View Application.

  2. In the top menu bar, click View.

  3. From the drop-down, select Event list….

  4. Once an event is generated, it will appear in the G-view Application Event log and Genesis Platform.

  5. G-View event log details such as:

  • Start time

  • Event name

  • Stop time

  • Text/description

✅ This confirms that events configured in G‑Set are successfully logged and visible in G‑View, ensuring the device is online and events are being captured.

 

                              

 

                              

 

 

 

 

 

    • Related Articles

    • Geutebrueck Device Configuration

      Geutebrueck Device Configuration Platform Geutebrueck is VMS applications. It provides recording, live viewing, playback, events/alarms. Port Web API Interface: HTTPS 13333 RTSP Streaming: 554 Applications G-Set → system configuration G-View → ...

    • Genesis Site, Device and FT Configurations for Adpro Devicetype

      Adding a Site: 1. Click (+) to add a site 2. Provide Key properties like Name of the Site, and address details. Based on the availability of Site name, and its address, Location details will get auto filled: 3. Once the Site is successfully added in ...

    • Tower Monitoring Alarm Configuration Guide (Includes Teltonika-IOT, EFOY and Victron Device Configuration)

      Introduction When we refer to Tower Monitoring in Genesis, we are describing an integrated ecosystem of multiple IoT subsystems working together to ensure the tower’s operational continuity, energy efficiency, and communication reliability. Each ...

    • Hanwah Device Configuration issue

      ISSUE: When there is an issue related to adding a device, follow the below instructions. Firstly, check if the credentials shared are Basic & Digest authentication. To check, the following URL needs to be framed. http://[USERNAME]:[PASSWORD]@[IP ...

    • Genesis Audio Configuration Documentation

      Introduction This document provides a comprehensive overview of the configuration process required to integrate SIP Speakers into the Genesis environment using the Genesis Audio Device Type. It outlines the necessary configuration steps, system ...